{"title":"Ready Microcement","description":"\u003cp\u003eReady is Homecret's ready-to-use microcement: no mixing, no resins and no pot life. Just add the pigment and apply. Available in base, medium and fine grain, in 5, 10 and 20 kg tubs.\u003c\/p\u003e","products":[{"product_id":"microcemento-ready-base-5-kg","title":"Microcement Ready Base 5 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Base 5 kg\u003c\/strong\u003e. Ready Base is the first coat of the Ready system: it levels, reinforces and prepares the surface for the finish. A 2-in-1 ready-to-use, polyurethane-based microcement in a 5 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6,25 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3,1 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn floors (2,5-3 kg\/m²)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1,7-2 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply in \u003cstrong\u003e2 coats\u003c\/strong\u003e with a steel trowel, 1 mm maximum each, sanding each coat with 40 grit.\u003c\/li\u003e\n\u003cli\u003eIt is the essential coat on hard substrates: tiles, render or marble. On plasterboard or plaster, Homecret kits go straight to the finishing coat.\u003c\/li\u003e\n\u003cli\u003eOn floors, allow for higher consumption: Homecret recommends 2,5 to 3 kg per m², above the manufacturer's theoretical minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 125 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57343249875268,"sku":"READY-BASE-5KG","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyBase5Kg.png?v=1790662314"},{"product_id":"microcemento-ready-base-10-kg","title":"Microcement Ready Base 10 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Base 10 kg\u003c\/strong\u003e. Ready Base is the first coat of the Ready system: it levels, reinforces and prepares the surface for the finish. A 2-in-1 ready-to-use, polyurethane-based microcement in a 10 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12,5 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6,25 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn floors (2,5-3 kg\/m²)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3,3-4 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply in \u003cstrong\u003e2 coats\u003c\/strong\u003e with a steel trowel, 1 mm maximum each, sanding each coat with 40 grit.\u003c\/li\u003e\n\u003cli\u003eIt is the essential coat on hard substrates: tiles, render or marble. On plasterboard or plaster, Homecret kits go straight to the finishing coat.\u003c\/li\u003e\n\u003cli\u003eOn floors, allow for higher consumption: Homecret recommends 2,5 to 3 kg per m², above the manufacturer's theoretical minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 250 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182518084,"sku":"READY-BASE-10KG","price":68.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyBase10Kg.png?v=1790683870"},{"product_id":"microcemento-ready-base-20-kg","title":"Microcement Ready Base 20 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Base 20 kg\u003c\/strong\u003e. Ready Base is the first coat of the Ready system: it levels, reinforces and prepares the surface for the finish. A 2-in-1 ready-to-use, polyurethane-based microcement in a 20 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e25 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12,5 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn floors (2,5-3 kg\/m²)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6,7-8 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply in \u003cstrong\u003e2 coats\u003c\/strong\u003e with a steel trowel, 1 mm maximum each, sanding each coat with 40 grit.\u003c\/li\u003e\n\u003cli\u003eIt is the essential coat on hard substrates: tiles, render or marble. On plasterboard or plaster, Homecret kits go straight to the finishing coat.\u003c\/li\u003e\n\u003cli\u003eOn floors, allow for higher consumption: Homecret recommends 2,5 to 3 kg per m², above the manufacturer's theoretical minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 500 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182550852,"sku":"READY-BASE-20KG","price":135.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyBase20Kg_cc385a86-5df6-48fc-b6aa-2391f26b5c33.png?v=1790684554"},{"product_id":"microcemento-ready-medio-5-kg","title":"Microcement Ready Medium 5 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Medium 5 kg\u003c\/strong\u003e. Ready Medium is the medium-texture finishing coat: more visual character, with a light grain you can feel to the touch and see under raking light. A 2-in-1 ready-to-use, polyurethane-based microcement in a 5 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8,5 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4,25 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in thin layers of up to 1 mm, leaving the characteristic grain of this texture visible.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 125 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182714692,"sku":"READY-MEDIO-5KG","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyMedio5Kg_db483410-9618-490b-9ef9-093e3a8c4c0e.png?v=1790684343"},{"product_id":"microcemento-ready-medio-10-kg","title":"Microcement Ready Medium 10 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Medium 10 kg\u003c\/strong\u003e. Ready Medium is the medium-texture finishing coat: more visual character, with a light grain you can feel to the touch and see under raking light. A 2-in-1 ready-to-use, polyurethane-based microcement in a 10 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8,5 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in thin layers of up to 1 mm, leaving the characteristic grain of this texture visible.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 250 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182780228,"sku":"READY-MEDIO-10KG","price":68.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyMedio10Kg_0f5e9ca5-a95b-49f9-b78e-50035067bdc9.png?v=1790684179"},{"product_id":"microcemento-ready-medio-20-kg","title":"Microcement Ready Medium 20 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Medium 20 kg\u003c\/strong\u003e. Ready Medium is the medium-texture finishing coat: more visual character, with a light grain you can feel to the touch and see under raking light. A 2-in-1 ready-to-use, polyurethane-based microcement in a 20 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e34 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in thin layers of up to 1 mm, leaving the characteristic grain of this texture visible.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 500 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182878532,"sku":"READY-MEDIO-20KG","price":135.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyMedio20Kg.png?v=1790684596"},{"product_id":"microcemento-ready-fino-5-kg","title":"Microcement Ready Fine 5 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Fine 5 kg\u003c\/strong\u003e. Ready Fine is the fine-texture finishing coat: the classic smooth, seamless look of microcement. A 2-in-1 ready-to-use, polyurethane-based microcement in a 5 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in very thin layers of 0,5 mm maximum, aiming for a smooth, seamless surface.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 125 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344182944068,"sku":"READY-FINO-5KG","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/Ready_Fino_5KG.png?v=1791186034"},{"product_id":"microcemento-ready-fino-10-kg","title":"Microcement Ready Fine 10 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Fine 10 kg\u003c\/strong\u003e. Ready Fine is the fine-texture finishing coat: the classic smooth, seamless look of microcement. A 2-in-1 ready-to-use, polyurethane-based microcement in a 10 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in very thin layers of 0,5 mm maximum, aiming for a smooth, seamless surface.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 250 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344183009604,"sku":"READY-FINO-10KG","price":70.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyFino10Kg.png?v=1790684625"},{"product_id":"microcemento-ready-fino-20-kg","title":"Microcement Ready Fine 20 kg","description":"\u003cp\u003e\u003cstrong\u003eMicrocement Ready Fine 20 kg\u003c\/strong\u003e. Ready Fine is the fine-texture finishing coat: the classic smooth, seamless look of microcement. A 2-in-1 ready-to-use, polyurethane-based microcement in a 20 kg tub.\u003c\/p\u003e\n\u003ch3\u003eCoverage of this tub\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer's coverage (per coat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e40 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith 2 coats\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20 m²\u003c\/strong\u003e with this tub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCoverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply as a finishing coat with a steel trowel, in very thin layers of 0,5 mm maximum, aiming for a smooth, seamless surface.\u003c\/li\u003e\n\u003cli\u003e“Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.\u003c\/li\u003e\n\u003cli\u003eColour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.\u003c\/p\u003e\n\u003ch3\u003eWhat else you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement Pigment:\u003c\/strong\u003e 25 g per kg of microcement. For this tub, 500 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer\u003c\/strong\u003e on the substrate before the first coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealer and Polyurethane Varnish\u003c\/strong\u003e to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.\u003c\/li\u003e\n\u003cli\u003eBathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength: over 27 N\/mm² (class C30)\u003c\/li\u003e\n\u003cli\u003eIndoor air quality: A+ (low emissions)\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating (wet and electric systems)\u003c\/li\u003e\n\u003cli\u003eResistant to water under pressure: no penetration at 5 bar for 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eIn its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.\u003c\/p\u003e","brand":"Homecret","offers":[{"title":"Default Title","offer_id":57344183042372,"sku":"READY-FINO-20KG","price":139.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/3833\/2228\/files\/ReadyFino20Kg.png?v=1790684660"}],"url":"https:\/\/www.buymicrocement.com\/en\/collections\/ready-microcement.oembed","provider":"Homecret","version":"1.0","type":"link"}