Microcement Ready Fine 5 kg

Microcement Ready Fine 5 kg. Ready Fine is the fine-texture finishing coat: the classic smooth, seamless look of microcement. A 2-in-1 ready-to-use, polyurethane-based microcement in a 5 kg tub.

Coverage of this tub

Coverage on a well-prepared surface. The better levelled and prepared the substrate, the further it goes.

How to apply

• Apply as a finishing coat with a steel trowel, in very thin layers of 0,5 mm maximum, aiming for a smooth, seamless surface.
• “Fresh on dry” technique: let the previous coat dry (4-8 hours) and sand lightly with a random orbital sander, 120 to 220 grit.
• Colour it with Homecret Microcement Pigment to achieve any of the 24 colours on the colour chart.

No mixing with resins and no pot life: simply add the pigment, stir until uniform and apply. Close the tub tightly and it keeps for your next application.

What else you need

• Microcement Pigment: 25 g per kg of microcement. For this tub, 125 g.
• Bonding Primer on the substrate before the first coat.
• Sealer and Polyurethane Varnish to protect the finish.

What it's for

• Floors, walls and ceilings, indoors and outdoors; furniture, worktops and renovations over existing tiles without removing them.
• Bathrooms and shower trays (does not darken with water). Not suitable for swimming pools or continuous immersion.

Key technical data

• Compressive strength: over 27 N/mm² (class C30)
• Indoor air quality: A+ (low emissions)
• Suitable for underfloor heating (wet and electric systems)
• Resistant to water under pressure: no penetration at 5 bar for 3 days

Storage

In its original sealed container, between 10 ºC and 30 ºC, in a dry, ventilated place. Best used within 6 months of the manufacturing date.